Below is a partial list of customer approvals, click to learn more about each.

BAE Systems (Armament Systems Division)

  • AMS 2404: Electroless Nickel
  • AMS-M-3171: Galvanic Anodize / Dichromate
  • AMS-QQ-P-35: Passivation
  • ASTM-B-700: Silver Plating
  • ASTM-D-2651: FPL Etch
  • ASTM-D-3933: Phosphoric Acid Anodize
  • IPC-2221, Sec. 4.4.7: Hot Solder Dip, Electronic
  • MIL-A-8625: Chromic Acid Anodize
  • MIL-A-8625: Sulfuric Acid Anodize
  • MIL-C-14550: Copper Plating
  • MIL-C-8514: Wash Primer
  • MIL-DTL-16232: Phosphate
  • MIL-DTL-45204: Gold Plating
  • MIL-DTL-5541: Conversion Coating
  • QQ-N-290: Nickel Plating
  • QQ-S-365: Silver Plating

Bell Helicopter

  • BPS-4007: Passivation
  • BPS-4089: Fluorescent Penetrant Inspection (Post-Emulsified and Water Washable)
  • BPS-4138: Chemical Cleaning of Air Craft Materials
  • Industrial Specification Capability (See Approval List)

Eaton Corporation

  • MIL-STD-871: Chemical Stripping
  • VS 1-3-1-25: Chrome Plating
  •  VS 1-3-1-29: Chrome Plating
  • VS 1-3-1-54: Phosphate Coating
  • VS 1-3-1-71: Nickel Plating
  • 1-3-5-289: FPI VS

General Electric

  • A50TF Series: Dry Film Lube
  • A50TF1: Chromium Oxide on Aluminum
  • A50TF2: Chromium Oxide on Aluminum
  • A50TF196: Chromium Oxide on Aluminum
  • A50TF200: Chromium Oxide on Aluminum
  • F4TF8: Etch Inspection
  • F50TF: Series: Dry Film Lube
  • F50TF1: Chromium Oxide on Aluminum
  • F50TF7: Anodize-Aluminum
  • F50TF34: Chromium Oxide on Aluminum
  • F65B10A5: Anodize-Hardcoat (Alum)
  • F70D9: Chromium
  • F70J5: Plating: Platinum
  • P1TF24, P4TF18: Chem. Surf Prep for Chemical Bonding (process code CX)
  • P3TF2: Inspection: FPI
  • P3TF19: Cleaning: Titanium
  • P3TF47: Inspection: FPI
  • P4TE5B: Passivation
  • P4TF2: Cleaning: Acid/Alkali
  • P4TF3: Cleaning: Titanium
  • P4TF5 & P4-TE20: Chemical Stripping or Leaching (process code DK)
  • P4TF9: Passivation
  • P4TF14: PAA Surface Prep
  • Industrial Specification Capability (See Approval List)

GKN

  • WAPS09-02:  Cleaning of metals
  • WAPS25-07:  Approval of NDT Personnel
  • WAPS25-02: Penetrant Inspection Industrial Specification Capability (see Approval List)

Goodrich Landing Gear

  • Industrial Specification Capability (see Approval List)

Honeywell Aerospace

  • CP.ANDZ.C: Chromic Acid Anodize
  • CP.ANDZ.H:  Hard Anodize
  • CP.ANDZ.S: Sulfuric Anodize
  • CP.CLE.P: Passivation
  • CP.CNV.A: Conversion/Phosphate Coatings
  • CP.CNV.C: Conversion/Phosphate Coatings
  • CP.CNV.M: Conversion/Phosphate Coatings
  • CP.CNV.P: Conversion/Phosphate Coatings
  • CP.CNV.T: Conversion Coatings-Titanium
  • CP.PLT.AG: Silver Plating
  • CP.PLT.AU: Gold Plating
  • CP.PLT.CR: Chrome Plating
  • CP.PLT.CU: Copper Plating
  • CP.PLT.NI: Nickel Plating
  • CP.PLT.NIB: Electroless Nickel Boron Plating
  • CP.PLT.NIP: Electroless Nickel Plating

Lockheed Martin Corporation

  • AMS 2700: Passivation of Corrosion Resistant Steel, Method 1, 2
  • AMS-C-26074/MIL-C-26074: Electroless Nickel
  • AMS QQ-P-35: Passivation of Stainless Steel Type II, VI, VII
  • ASTM A380: Passivation
  • ASTM A967: Passivation for Stainless Steel
  • ASTM D3933: Preparation of Aluminum Surfaces for Structural Adhesive Bonding
  • ASTM E1417: Liquid Penetrant Inspection Type I, Method A
  • MAP-201057-5X1X: URF Prep Anodic Coating Prime LM-CC10589A
  • MIL-A-8625: Chromic Acid Anodizing Type I, IB, IC
  • MIL-A-8625: Sulfuric Acid Anodizing Type II, IIB, III
  • MIL-C-5541D: Chem Film
  • MIL-C-5541E: Chem Film
  • MIL-DTL-5541F: Chem Film Type I, II
  • QQ-P-35: Passivation
  • MFC Approved Supplier
  • Industrial Specification Capability (see Approval List)

Lord

  • AMS2404: Plating, Electroless Nickel
  • AMS2411: Plating Silver for High Temperature Applications
  • AMS2423: Plating, Nickel Hard Deposit
  • AMS2424: Plating, Nickel Low-Stressed Deposit
  • AMS2460: Plating, Chromium Hard Deposit
  • AMS2469: Hard Anodic Coating, Aluminum Alloys
  • AMS2471: Sulfuric Acid Anodize (Undyed)
  • AMS2473: Chemical Film Treatment for Aluminum Alloys, General Purpose Coating
  • AMS2482: Hard Coating Treatment of Aluminum Alloys, Teflon-Impregnated or Codeposited
  • AMS2488: Anodic Treatment (Solution >pH 13) – Titanium Alloys
  • AMS2700: Passivation of Corrosion Resistant Steels
  • AMS-A-8625: Anodic Coatings for Aluminum Alloys
  • AMS-QQ-C-320: Chromium Plating (Electrodeposited)
  • AMS-QQ-N-290: Nickel Plating (Electrodeposited)
  • ASTM A967: Chemical Passivation Treatment of Stainless Steel
  • ASTM B700: Standard Specification for Electrodeposited Coatings of Silver for Engineering Use

 

  • ASTM-E1417: Penetrant Inspection
  • EP 1238: Sulfuric Anodize
  • EP 1240: Chem Film, brush application
  • EP 1242: Teflon Hardcoat
  • MIL-A-8625: Anodic Coatings for Aluminum Alloys
  • MIL-C-26074: Electroless Nickel Coatings
  • MIL-C-5541: Chemical Conversion Coatings on Aluminum Alloys
  • MIL-DTL-53039: Coating, Aliphatic Polyurethane, Single Component
  • MIL-DTL-5541: Chemical Conversion Coatings on Aluminum Alloys
  • MIL-L-23398: Lubricant, Solid Film, Air-Cured, Corrosion Inhibiting
  • MIL-P-23377: Primer Coatings: Epoxy, High-Solids
  • MIL-PRF-22750: Coating, Epoxy. High-Solids
  • MIL-PRF-23377: Primer Coatings: Epoxy, High-Solids
  • MIL-PRF-85582: Primer Coatings: Epoxy, Waterborne
  • MIL-STD-867: Temper Etch Inspection
  • QQ-C-320: Chromium Plating (Electrodeposited)
  • QQ-S-365: Silver Plating (Electrodeposited), General Requirements

Moog

  • ASTM B607: Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use
  • ASTM-E1417: Penetrant Inspection
  • EP3204: Passivation
  • MIL-DTL-5541: Chemical Conversion Coatings on Aluminum Alloys
  • MIL-F-18264: Finishes: Organic, Weapons Systems, Application & Control Of
  • MIL-G-45204: Gold Plating, Electrodeposited
  • QQ-C-320: Chromium Plating (Electrodeposited)
  • QQ-N-290: Nickel Plating (Electrodeposited)

NAVSEA

  • OD 56935: Electroless Nickel

Parker Hannifin Aerospace Group

  • Industrial Specification Capability (see Approval List)

Pratt & Whitney

  • AMS2403: Nickel Plating
  • AMS2406: Chrome Plating
  • AMS2424: Nickel, Low Stress
  • AMS2469: Hardcoat
  • AMS2470: Anodize
  • AMS2473: Chem. Film
  • CPW 755: Sulfuric Anodize
  • PWA 36: Electroless Nickel Plating
  • PWA 83: Surface Cleaning for Adhesive Bonding Applications
  • PWA 104: Controlled Environment Room
  • PWA 108: Chem. Millings, Titanium Alloys Only
  • PWA 116: Cleaning of Titanium & Titanium Alloys
  • PWA 259: Electroless Nickel Boron Plating
    Titanium Alloys
  • PWA 830: Protective ‘Surface Treatment
  • PWA 36965: Nickel Plating
  • Industrial Specification Capability (see Approval List)

Rolls-Royce

  • AMS2403: Plating, Nickel General Purpose
  • AMS2404: Plating, Electroless Nickel
  • AMS2405: Electroless Nickel Plating, Low Phosphorus
  • AMS2406: Plating, Chromium Hard Deposit
  • AMS2407: Plating, Chromium, Porous
  • AMS 2409: Plating, Silver
  • AMS2418: Plating, Copper
  • AMS2424: Plating, Nickel Low-Stressed Deposit
  • AMS2460: Plating, Chromium Hard Deposit
  • AMS2469: Hard Anodic Coating, Aluminum Alloys
  • AMS2470: Chromic Acid Anodize
  • AMS2471: Sulfuric Acid Anodize (Undyed)
  • AMS2472: Sulfuric Acid Anodize (Dyed)
  • AMS2473: Chemical Film Treatment for Aluminum Alloys, General Purpose Coating
  • AMS2474: Chemical Film Treatment for Aluminum Alloys, Low Electrical Resistance
  • AMS2480: Phosphate Treatment Paint Base
  • AMS2481: Phosphate Treatment – Antichafing
  • EIS 790: NDT FPI
  • EIS-1169: Fluorescent Penetrant Inspection
  • EIS-1169 Method D
  • EPS 11304: EMS 26725 Paint
  • EPS 11430: Silicon Resin
  • RPS 26: Paint Stripping
  • RPS 54: Anodizing of Aluminum Alloys
  • RPS 237: Nickel Plating
  • RPS 367: Corrosion Protection of Components
  • RPS 386: Abrasive Blasting
  • RPS 449: Electroless Nickel
  • RPS 461: Aqueous Cleaning
  • RPS 661: Organic Barrier Coatings
  • RPS 666: Sacrificial Coatings
  • RPS 702: Fluorescent Penetrant Inspection
  • RPS 906: Non-Destructive Testing
  • RPS 953: Control of Heating & Thermal Processing of Materials
  • RRP 51000: General Cleaning-Degreasing
  • Industrial Specification Capability (see Approval List)

Sikorsky Aircraft

  • AMS2460: Chrome Plating
  • AMS-QQ-N-290: Nickel Plating
  • ASTM E8: Tensile Testing
  • MIL-A-8626: Boric Sulfuric Anodize
  • MIL-DTL-16232: Phosphate
  • MIL-I-8474: Anodize Bleed Out
  • NAS410: Fluorescent Penetrant Inspection
  • SS8806: Fluorescent Penetrant Inspection
  • SS8407: Stress Relieve and Embrittlement
  • SS8811: Inspection: Anodic Bleedout
  • SS8813: Fluorescent Penetrant Inspection
  • SS8414: Nickel Plating
  • SS8416: Phosphating of Steel
  • SS8429:  Chrome Plating, High Stress Steel
  • SS8482:  Anodize, Phosphoric Acid
  • SS8483: Boric Sulfuric Anodize
  • SS8487: Silver Plating
  • SS8495: Plating, Chromium or Nickel and Chromium on Aluminum Alloys
  • SS8603:  Bonding, Adhesive Primer Application
  • SS8752:  Cleaning of Materials prior to Bonding Primer Applications
  • SS8806, NAS 410: Inspection: Penetrant
  • SS9211:  Control of Flight Safety Parts Program, Fluorescent Penetrant Inspection
  • SS9213:  Boric Sulfuric Anodize, Phosphate
  • SS9309:  Adhesive Primer
  • SS9309:  Controlled Environments, Processing Areas
  • SS9211:  Control of Flight Safety Parts Program
  • Industrial Specification Capability (see Approval List)

Turbomeca

  • CCT 418: Fluorescent Penetrant Inspection
  • CCT LB508: Anodizing of Aluminum
  • CCT LB540: Chemical Preparation of Parts
  • CCT LB597: Hard Anodizing of Aluminum
  • CCT LB608: Aluminum Alloy Chromate Dip Treatment